![]() Utest Software for Semi-Automatic Cement Compression/Flexure Tests (USOFT-3722.SLP) Removable transparent front-rear safety doors (Should be factory installed and ordered separately).Maximum pressure valves to avoid machine overloading.Free of charge Utest software for compression/flexture testing machines(USOFT-4820.SLP) for compression, flexture, splitting tensile strength tests of construction materials such as concrete, cement, brick/masonry units.RS232 Serial port for PC or thermal or dot matrix printer.Real time numeric display of load and load pressure.2 channels for load-cell or pressure transducer with two different calibration table (LPI Battery Operated Digital Readout Unit (UTC-4920LP).Class A (ASTM) starting from with the 1 % of the 250 kN and 15 kN capacity Multi-point calibration.1 channel with two different calibration table (by changing the sensor belong to other frame, the unit can be control for second test frame).Real time numeric display of load and load rate.The unit is operates with DC voltage source of -1,5 to 1,5 volts. The LPI Battery Operated Digital Readout Unit (UTC-4920LP) has been designed to use with load cells or pressure transducers on different material test applications. LPI Battery Operated Digital Readout Unit Hydraulic motor oil number 46, must be used in the tank. The level and oil temperature can be seen on the indicator fitted to the tank. The tank (20 L capacity) includes enough oil to fill the mechanism which pushes the ram during the test. The motor which drives the dual pump is an AC motor and 0.55 kW.Ī distribution block is used to control the oil flow direction supplied by the dual stage pump and those are fitted to solenoid valve, safety valve (maximum pressure valve), low pressure gear pump and high pressure radial piston pump Rapid approach property of the machine shortens the time interval from the piston starts moving until the upper platen touches to the specimen and helps to save a great amount of time in case of numerous specimens are going to be tested. On the dual stage pump, high delivery low pressure gear pump is used for rapid approach, while low delivery high pressure durable variable output pump is used for test execution. The dual stage pump is formed by two groups, one is low pressure gear pump and second high pressure radial piston pump. The power pack is equipped with a safety valve (maximum pressure valve) to avoid machine overloading. A rapid approach pump is supplied as standard. The power pack can load different frames with required pace rates. ![]() The UTC-4820 Motorized (Semi-Automatic) Power Pack, controlled by a pressure rate control valve, is designed to supply the required oil to the load frames for loading. The UTEST Semi-Automatic cement compression and flexure testing machines consist of a very rigid two column single or double chamber frame and UTC-4820SLP hydraulic powerpack with LPI Battery Operated Digital Readout Unit.Ĭompression and flexure jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately. The UTEST Semi-Automatic cement compression and flexure testing machines allow operators who have minimal experience to perform the tests. These testers also meet the requirements of CE norms for safety and health of the operator.ĮN 196-1, 459-2, 1015-11, 13454-2 ASTM C109, C348, C349 BS 4550-3.4 These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform with current standards EN 196-1, 459-2, 1015-11, 13454-2 ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. ![]() The UTEST Semi-Automatic (Motorized) range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples.
0 Comments
Leave a Reply. |